Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.
Currently locked by: 216.73.216.205
Lock expires at: 2026/11/13 13:50 (0 min)
This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
[[https://pctresearch.com/|{{:wiki_banner.jpg?nolink&800|}}]]

===== Manage Configure Files by Git =====
ex) 
^username|pctr|
^mail address|pctresearch@pctresearch.com|
==== Case1: user home directory  ====
<code Bash>
$ cd ~/   # /home/pctr
$ cat .gitconfig
[user]
        name = pctr
        email = pctresearch@pctresearch.com
[core]
        editor = code
[merge]
        tool = meld
[mergetool "meld"]
    cmd = meld "$LOCAL" "$MERGED" "$REMOTE" --output "$MERGED"
[mergetool "meld"]
        trustExitCode = false
[difftool]
    Prompt = false
[difftool "meld"]
    cmd = meld "$LOCAL" "$REMOTE"
</code>
<code Bash>
$ cat .gitignore
# Ignore all
*

# Unignore all start with dot files
#!.*

# Unignore specific start with dot dirs
!.ssh/
.ssh/*

# Unignore specific files
!.bash_logout
!.bashrc
!.gitconfig
!.gitignore
!.profile
!.vimrc

!.ssh/config
</code>
=== Initializes a new Git repository in the current directory. ===
<code Bash>
$ git init
</code>
=== Shows the current state of your repository ===
<code Bash>
$ git status
</code>
You can view tracked files in specific directories with:
<code Bash>
  ex)
$ git status .ssh/*
</code>
=== stage the modified and new files. ===
<code Bash>
$ git add -A
</code>
=== Creates a new commit with the changes in the staging area and specifies the commit message inline.===
<code Bash>
$ git commit -m “<message>”
</code>
done.

=== To list all the files currently being tracked under the branch master, use ls-tree:===
<code Bash>
$ git ls-tree -r master --name-only
.bash_logout
.bashrc
.gitconfig
.gitignore
.motd_shown
.profile
.ssh/config
.sudo_as_admin_successful
.vimrc
</code>
==== Backup configure files in home directory ====
If you want to make backup in /backup/home:
<code Bash>
$ sudo mkdir -p /backup/home
$ sudo chown pctr:pctr /backup/home
$ cd /backup/home
$ git clone /home/pctr
</code>
And you can update backup with:
<code Bash>
$ cd /backup/home/pctr
$ git remote -v   # For confirmation
origin  /home/pctr (fetch)
origin  /home/pctr (push)
$ git fetch
$ git pull /home/pctr master
From /home/pctr
 * branch            master     -> FETCH_HEAD
Already up to date.
</code>

==== Case2: under certain root owner directories (E.g. /etc  ====
This time we are going to make git repository in "/etc".

You can do this in other directories like "/usr".

fundamentally, same as ''**Case1**''
.gitconfig is same.
<code Bash>
$ cat /.gitconfig
[user]
        name = pctr
        email = pctresearch@pctresearch.com
[core]
        editor = code
[merge]
        tool = meld
[mergetool "meld"]
    cmd = meld "$LOCAL" "$MERGED" "$REMOTE" --output "$MERGED"
[mergetool "meld"]
        trustExitCode = false
[difftool]
    Prompt = false
[difftool "meld"]
    cmd = meld "$LOCAL" "$REMOTE"
</code>
If you have apache2, ssh and ufw installed and configured, the .gitignore will look like this.
<code Bash>
$ cat /.gitignore
# .gitignore for /etc
# Ignore all
*

# ssh
!ssh/
ssh/*
# ufw
!ufw/
ufw/*
!ufw/applications.d/
ufw/applications.d/*
!ufw/applications.d/apache2/
# apache2
!apache2/
apache2/*
!apache2/sites-available/
apache2/sites-available/*
!apache2/sites-enabled/
apache2/sites-enabled/*
!apache2/mods-enabled/
apache2/mods-enabled/*
!apache2/conf-available/
apache2/conf-available/*

# apache2 config
!apache2/sites-available/wweb.conf
!apache2/sites-enabled/wweb_ssl.conf
!apache2/apache2.conf
!apache2/envvars
!apache2/mods-enabled/dir.conf
!apache2/conf-available/serve-cgi-bin.conf
!apache2/sites-available/default-ssl.conf
!apache2/sites-available/wweb_ssl.conf

# Unignore specific files
!.gitignore
!.gitconfig

# ssh config
!ssh/ssh_config

# ufw config
!ufw/ufw.conf
!ufw/applications.d/apache2-utils.ufw.profile
!ufw/applications.d/openssh-server
</code>
=== Initializes a new Git repository in the current directory. ===
<code Bash>
$ cd /etc
$ sudo git init
</code>
=== Shows the current state of your repository ===
<code Bash>
$ git status
On branch master

No commits yet

Untracked files:
  (use "git add <file>..." to include in what will be committed)
        .gitconfig
        .gitignore
        apache2/
        ssh/
        ufw/
</code>
You can view tracked files in specific directories with:
<code Bash>
  ex)
$ git status apache2/*
On branch master

No commits yet

Untracked files:
  (use "git add <file>..." to include in what will be committed)
        apache2/apache2.conf
        apache2/conf-available/
        apache2/envvars
        apache2/mods-enabled/
        apache2/sites-available/
        apache2/sites-enabled/

nothing added to commit but untracked files present (use "git add" to track)
$ git status apache2/conf-available/*
On branch master

No commits yet

Untracked files:
  (use "git add <file>..." to include in what will be committed)
        apache2/conf-available/serve-cgi-bin.conf

nothing added to commit but untracked files present (use "git add" to track)
</code>
=== stage the modified and new files. ===
<code Bash>
$ sudo git add -A
</code>
Check git status.
<code Bash>
$ git status
On branch master

No commits yet

Changes to be committed:
  (use "git rm --cached <file>..." to unstage)
        new file:   .gitconfig
        new file:   .gitignore
        new file:   apache2/apache2.conf
        new file:   apache2/conf-available/serve-cgi-bin.conf
        new file:   apache2/envvars
        new file:   apache2/mods-enabled/dir.conf
        new file:   apache2/sites-available/default-ssl.conf
        new file:   apache2/sites-available/wweb.conf
        new file:   apache2/sites-available/wweb_ssl.conf
        new file:   apache2/sites-enabled/wweb_ssl.conf
        new file:   ssh/ssh_config
        new file:   ufw/applications.d/apache2-utils.ufw.profile
        new file:   ufw/applications.d/openssh-server
        new file:   ufw/ufw.conf
</code>
=== Creates a new commit with the changes in the staging area and specifies the commit message inline.===
<code Bash>
$ sudo git commit -m "apache2 ssh ufw"
$ sudo git commit -m "apache2 ssh ufw"
[master (root-commit) 44f6c7b] apache2 ssh ufw
....
 14 files changed, 656 insertions(+)
 create mode 100644 .gitconfig
 create mode 100644 .gitignore
 create mode 100644 apache2/apache2.conf
 create mode 100644 apache2/conf-available/serve-cgi-bin.conf
 create mode 100644 apache2/envvars
 create mode 120000 apache2/mods-enabled/dir.conf
 create mode 100644 apache2/sites-available/default-ssl.conf
 create mode 100644 apache2/sites-available/wweb.conf
 create mode 100644 apache2/sites-available/wweb_ssl.conf
 create mode 120000 apache2/sites-enabled/wweb_ssl.conf
 create mode 100644 ssh/ssh_config
 create mode 100644 ufw/applications.d/apache2-utils.ufw.profile
 create mode 100644 ufw/applications.d/openssh-server
 create mode 100644 ufw/ufw.conf
</code>
done.

=== To list all the files currently being tracked under the branch master, use ls-tree:===
<code Bash>
$ git ls-tree -r master --name-only
.gitconfig
.gitignore
apache2/apache2.conf
apache2/conf-available/serve-cgi-bin.conf
apache2/envvars
apache2/mods-enabled/dir.conf
apache2/sites-available/default-ssl.conf
apache2/sites-available/wweb.conf
apache2/sites-available/wweb_ssl.conf
apache2/sites-enabled/wweb_ssl.conf
ssh/ssh_config
ufw/applications.d/apache2-utils.ufw.profile
ufw/applications.d/openssh-server
ufw/ufw.conf
</code>
==== Backup configure files in /etc directory ====
If you want to make backup in /backup/etc :
<code Bash>
$ sudo mkdir -p /backup
$ cd /backup
$ sudo git clone /etc
</code>
This will allow you to run "git status" without sudo:
<code Bash>
$ git config --global --add safe.directory /backup/etc
$ git status
On branch master
Your branch is up to date with 'origin/master'.

nothing to commit, working tree clean
</code>
You can update backup with:
<code Bash>
$ cd /backup/etc
$ git remote -v   # For confirmation
origin  /etc (fetch)
origin  /etc (push)
$ sudo git fetch
$ git pull /etc master
From /etc
 * branch            master     -> FETCH_HEAD
Already up to date.
</code>

==== For reference ====
Sample of ''**/usr/.gitignore**''
<code Bash>
$ cat /usr/.gitignore
# .gitignore file for /usr
# Ignore all
*

# Unignore specific dirs
!local/
local/*
!local/bin/
local/bin/*

# ssl certificate
!/usr/share/
/usr/share/*
!/usr/share/ssl-cert/
/usr/share/ssl-cert/*

# ssl certificate config
!/usr/share/ssl-cert/ssleay.cnf
!/usr/share/ssl-cert/ssleay_wweb.cnf

# /usr/loval/bin  # your original shell
!local/bin/ialert.sh
!local/bin/inwatch.sh

# Unignore specific files
!.gitignore
!.gitconfig
</code>

===== Usefull Command =====
==== Restore an Unintentionally Modified Config File ====
<code Bash>
$ git status
On branch master
Changes not staged for commit:
  (use "git add <file>..." to update what will be committed)
  (use "git restore <file>..." to discard changes in working directory)
        modified:   <file name>

$ git restore <file name>
  or
$ sudo git restore <file name>
</code>
==== Check Modified History ====
<code Bash>
$ git log
commit d66c386b161b6c6447aa8f6a2845cdfe23d94f45 (HEAD -> master)
Author: pctr <pctresearch@pctresearch.com>
Date:   Thu Feb 27 08:09:26 2025 +0900

    .gitignore

commit e22036cf2557d4ab99095ede6e1c293787f9d152
Author: pctr <pctresearch@pctresearch.com>
Date:   Thu Feb 20 04:28:24 2025 +0900

    add ssh setting

commit d474b84927877651e3b8725c6c7d1d3780c4b6c4
Author: pctr <pctresearch@pctresearch.com>
Date:   Wed Feb 19 20:02:35 2025 +0900

    Customize some configuration files

commit 8175285fb6420ddd2bd23df18e7f8c9c74e9e830
Author: pctr <pctresearch@pctresearch.com>
Date:   Wed Feb 19 19:54:01 2025 +0900

    initial status
</code>
<code Bash>
$ cgit diff 8175285fb6420ddd2bd23df18e7f8c9c74e9e830..HEAD .bashrc
diff --git a/.bashrc b/.bashrc
index b488fcc..a369f62 100644
--- a/.bashrc
+++ b/.bashrc
@@ -8,6 +8,16 @@ case $- in
       *) return;;
 esac

+blk='\[\033[01;30m\]'   # Black
+red='\[\033[01;31m\]'   # Red
+grn='\[\033[01;32m\]'   # Green
+ylw='\[\033[01;33m\]'   # Yellow
+blu='\[\033[01;34m\]'   # Blue
+pur='\[\033[01;35m\]'   # Purple
+cyn='\[\033[01;36m\]'   # Cyan
+wht='\[\033[01;37m\]'   # White
+clr='\[\033[00m\]'      # Reset
+
 # don't put duplicate lines or lines starting with space in the history.
 # See bash(1) for more options
 HISTCONTROL=ignoreboth
@@ -57,7 +67,8 @@ if [ -n "$force_color_prompt" ]; then
 fi

 if [ "$color_prompt" = yes ]; then
-    PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '
+#    PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '
+    PS1='${debian_chroot:+($debian_chroot)}'${grn}'\u@\h'${clr}':'${blu}'\w\n'${clr}
 else
     PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
 fi
@@ -115,3 +126,23 @@ if ! shopt -oq posix; then
     . /etc/bash_completion
   fi
 fi
+alias sudo='sudo '
+alias cpu10='ps -L aux | sort -nr -k 3 | head -10'
+alias mem10='ps -L aux | sort -nr -k 4 | head -10'
+alias lsmount='mount |column -t'
+alias sshk='ssh -p 65342 kan@win10kan2'
+alias sshuk='ssh -p 65342 kan@ubuntukan'
+alias vimn='vim.nox -u ~/.vimrc '
+alias ggit='export GIT_EXTERNAL_DIFF=git-meld-diff && git '
+alias cgit='unset GIT_EXTERNAL_DIFF && git '
+
+function git_branch() {
+    if [ -d .git ] ; then
+        printf "%s" "($(git branch 2> /dev/null | awk '/\*/{print $2}'))";
+    fi
+}
+
+PS_GIT='$(git_branch)'
+#PS1=${cyn}${PS_GIT}${clr}${PS1}${pur}'\n'${clr}'\$ '
+PS1=${cyn}${PS_GIT}${clr}${PS1}${pur}''${clr}'\$ '
+
(END)
</code>
==== Restore a Specific Historical Revision of a Specific Config File ====
<code Bash>
$ git restore --source d474b84927877651e3b8725c6c7d1d3780c4b6c4 .gitignore
</code>
<code Bash>
$ git restore <file name>
</code>
is equal to :
<code Bash>
$ git restore --source HEAD <file name>
</code>